Product details:

Direct replacement for the following ProdecoTech Electric Bikes: Genesis 400 DT Genesis 600 DT Genesis R 600 DT Genesis RS 600 DT Phantom X 400 DR Phantom X 600 DT Phantom XR 600 DT Phantom X RS 600 DT Rebel X Rebel X Suspension Rebel X9 Found on Prodecotech Electric Bikes that utilize a downtube-style battery system. 50 x Samsung's Highest Grade NCA 18650 Lithium Nickel Cobalt Aluminum Oxide (LiNiCoAlO2) Cells Installing the battery: The battery is secured in place at the base by around elbow combined with a securing mount. At the top, the battery is secured by a spring-loaded cylinder latch (E1). It is important to ALWAYS confirm the battery is locked in place. Follow these instructions to install and lock the battery in place. Confirm the battery is OFF (No LED lights) by pushing the rubber panel switch at the top of the battery (E2). Hold the battery parallel to the downtube and angle the bottom of the battery towards the frame's lower docking mount. Sit the battery base's round elbow into the round concave space at the frame's lower docking mount (E3). Slowly mount the battery into position by moving it sideways, seating it into the frame's downtube (E4). Firmly push the top side of the battery to lock in place. The spring-loaded latch should have locked the battery in place. Confirm the battery is locked in place by pulling at the top of the battery as if you were going to remove it. If the battery moves even the slightest amount, it is not locked in place (E5).